Home / Product / Spring-loaded terminal blocks / PCB Terminal DB271VA-10.0

PCB Terminal DB271VA-10.0

Color:
  • Product Category Fixed Connector
  • Rated Current 76 A
  • Rated Voltage (III/2) 1000 V
  • Rated Cross-section 16 mm2
  • Number of Poles 2-12
  • Number of Rows 1
  • Number of Positions per Row 2-12
  • Product Series DB271VA
  • Pitch 10 mm
  • Connection Method Push-in Spring Connection
  • Mounting Wave Soldering
  • Conductor / PCB Connection Direction 90 °
  • Color Green
  • Pin Arrangement Z-shaped pin W
  • Solder Pin [P] 4 mm
  • Number of Solder Pins per Potential 3
  • Packaging Type Carton Packaging
Product Parameters
Put everything away
  • Technical Data-UL/CUL
    Use Group
    B C D
    Rated Voltage Rate Voltage [V]
    600 600 600
    Rated Current [A]
    66 66 5
    Wire Range [AWG]
    18-4
    Dielectric Voltage-Withstand
    2.2KV
  • Technical Data - IEC
    Overvoltage Category
    III III II
    Contamination Class
    3 2 2
    Rated Voltage [V]
    1000 1000 1000
    Rated Current [A]
    76 76 76
    Impulse constant voltage [KV]
    8 8 8
    Conductor cross section [hard/soft] [mm²]
    0.2-16.0
  • Material Information
    Insulation Material
    PA66
    Flame retardant rating
    UL94V-0
    Conductor Material
    Copper alloy
    Plating of conductor surface
    Sn plated
  • General parameters
    Pitch/Poles [mm]/[P]
    10/2-12
    Stripping Length [mm]
    18-20
    Screw/Torque Screw/Torque (Max) [N.m]
    /
    Operating temperature Operating temperature [℃]
    -40~+105
    Soldering temperature
    260℃/5S
    Pin dimensions [mm]
    1.2*1.0
    PCB Hole Diameter [mm]
    Ø1.8
  • Certification
    Ningbo Dorabo Electric Co., Ltd
  • Product environmental compliance
    Ningbo Dorabo Electric Co., Ltd
Product Advantages
  • Time-saving plug-and-pull connection method, no tools required
  • The set contact force ensures that the contact remains stable for a long time
  • The clamp position can be opened with a fixed Screwdriver to easily connect the wires
  • It uses Z-type welding needles and meets the non-mandatory certification 600-V-UL
  • The wires can be connected and disconnected from a single direction, allowing them to be integrated into the front of the device
Ningbo Dorabo Electric Co., Ltd Back Top